Rockwell Motor Cover, Door, Shoot and Dust Port Combo

$219.00 $209.00

Rockwell Motor Cover, Door, Shoot and Dust Port Combo


Rockwell table saw dust collection tray

Rockwell – Unisaw table saw dust collection Shoot

Rockwell Motor Cover, Door, Shoot and Dust Port Combo

Our Rockwell motor cover fits all Rockwell table saws with the rectangle opening.

Standard Model is 20.5 Length x 17.5 Wide x 8.5″ Deep total.

Why a Bell Plastics’ Unisaw motor cover?

  1.       Our cover is better than the original covers. You can throw our off the roof. You may scratch it, but it won’t break.
  2.       Our motor covers have extra depth that allows for larger motors and better cooling.
  3.       Black will go with every thing.
  4.       Easy to paint. You can match your saw or shop color.
  5.       Lighter weight means lower shipping costs.
  6.       It keeps the saw chips in the saw cabinet. Saves clean up time so you don’t waste time sweeping instead of cutting.

Unisaw Dust Port Large Rectangle Bottom Slot

Our Unisaw dust port only fits Unisaw table saw’s with the large rectangle chip chute at the bottom right hand side.

It covers the chip chute so you can attach your vacuum hose to the saw.

Vacuum formed from one solid piece out of  ABS plastic, and will last the lifetime of your saw and beyond.

Also it can be mounted on the floor to sweep chip into.

Rockwell Dust Collection Shoot

Our Rockwell dust collection shoot is designed to fit inside the lower cabinet of your Rockwell table saw.  It funnels chips and dust from the blade down to your vacuum line. You should never have to manually clean out your table saw cabinet again! Saving time and money.

Rockwell Door fits Table Saw & Shaper 10 inch blade Unisaw Delta

This replacement Rockwell door fits all 10 inch blade Rockwell, Unisaw and Delta models that use a door. The original vents are molded into the doors, however the vents are left closed vent for better dust collection.

Heavy duty Black ABS 8.875 X 11.875

The door also fits your Rockwell, Unisaw and Delta wood Shapers.

5 Inch dust collection port – Saw to hose adapter

Our 5 inch dust collection port will save you hours of clean up.

These adapter allow you to connect your dust collection hose to a table saw, band saw or sander. It also will work on any machine that makes chips.

The backing plate is bolted to the insides of the saw with the round hose connect passes through the saw’s wall.  A hose is slipped over the hose connector and held in place with a hose clamp. Because all saw are different our backing plate comes large flange and no holes so you can drill it to match your saw.

Additional information

Weight 14 lbs
Dimensions 21 × 21 × 22 in


There are no reviews yet.

Be the first to review “Rockwell Motor Cover, Door, Shoot and Dust Port Combo”

Your email address will not be published. Required fields are marked *