Boat Windows, Boat Windshields, Boat Hatches, Airplane Canopies, Airplane Windows, Car Windows, Car Windshields 

boat window Red air plane

We can make this window too

What do planes, trains and automobiles all have in common?

We’ve made custom windshields and windows for all three and much more.

Working from your old damaged windshield or pencil drawing, even when it is on a napkin. If you don’t have either, you can bring us your boat or plane and we will make it from from scratch.

We will cut down your motorcycle windshield or make a new custom motorcycle windshield that is 2 inches bigger than your old one.

Over the years we have even made replacement windows for Russian Migs, submarines, wing tip light covers, vintage plane canopies, airplane gun turrets. Replacement car dashes and rear light or turn signal covers. We have made windows for solar cars, 500 dollar cars and for 15,000,000 dollar cars. Plus giant custom dome for show cars.

Is your window is in kit form?

12 Pieces of broken plastic with 3 pieces missing, we can still make it.

Acrylic windows have hard surfaces and are very ridged. 10 to 15 years outdoors, sometimes people bring us 40 year old acrylic windows to replace.

Polycarbonate windows have a softer surface than acrylic. Regular polycarbonate last 3 to 5 years outdoors.

We don’t have any boat hardware, there is just to much hardware for us to stock.

LINK to dome page

Custom – Replacement boat windows

BEFORE the windshield is in 4 pieces.

AFTER 1 piece 3/16 acrylic in frame.

We have made hundreds of replacement boat windshields and boat windows.

Most windshield projects take 2 – 3 weeks to complete. Sometimes longer if we have to order special materials.

Unless we have the boat here we only drill holes in flat windows. We will send you all the drill bits needed so you can safely drill hole in your new windows and a piece of scrap material to practice on.

If you want Bell Plastics to remove and replace the window from the frame we will do it but it is a separate charge.

All over the phone or internet estimates are just estimates until we have seen the window/windshield in person.

It is getting very difficult to get some colors of material. If we can’t find a match to your color we will make it from the closes match we can find.

Gray colors tend to hold the color over time. Bronzes tend to change color faster in the sun.

Acrylic last longer in the sun than polycarbonate.

Boat window Sand crawler

Window for Sand Crawler

How to start?

Email a couple photos of your window. One from the front and one from the side to Be sure to include as much information as possible. Color, thickness, size also include any changes you want made. If you only have 1/2 the pieces please tell us. Or you can call us today for a quote.

Before you send us your windshields

  • Send Bell Plastics photos of your windows and get an estimate.
  • Clean your window. This will save you money.
  • Write your name and phone number on it. This will help you get your windshield back.
  • When the windshield is in pieces send as many pieces as you have.
  • Send us the windshield.
  • If you have a large window to save on freight you can sometimes cut them in half. Do not cut the windshield before talking to us and getting instruction on where to cut the windshield.

Solar car 1/8 PETG.

Mold for solar car window.

What’s the difference between Acrylic and Polycarbonate?

Our friends over at National Cycle have put together a little video to demonstrate and are kind enough to allow us to share it with you! Thanks National Cycle!

All phone and email estimates, guess and quote are only our best guess made from the information we have at the time. Until we see your window in person no price quoted is binding.  After we see your window and we give you a price we will not change the price.