Powermatic Table saw 66-72, 74 1-3 HP Motor Cover, Door and Dust Port COMBO

$149.00 $146.00

Powermatic Table saw 66-72, 74 1-3 HP Motor Cover, Door and Dust Port COMBO

Description

Powermatic Replacement Motor Cover Table Saw  66, 72, 74 1-3 HP

Our Powermatic replacement motor cover fits tables saw with the small motors the 1-3 HP. It does not fit the the larger 5 and 7.5 HP motor.

Crafted of heavy-duty ABS black plastic, this motor covers fits model numbers 66 and 72.

Standard model is 20.25 high x 20.25 wide x 12″ deep total.

Measure the top of your opening to the bottom of your opening. Have questions? Call us at 510-784-1111!

Why choose a Bell Plastics motor covers?

* Our motor covers have extra depth that allows for larger motors. If you ever want to replace an older bullet shaped motor with a newer high efficiency motor, there’s plenty of room.
* Stronger! These thick plastic covers are sturdy and designed to take incredible impacts without breaking!
* Lighter weight means lower shipping costs and easier installing!
* It’s easy to paint to match your saw or shop colors, but you don’t have to! Classic black goes with everything!
* Keeps the saw chips in the saw cabinet. Saves clean up time so you don’t waste time sweeping instead of cutting.

Powermatic 66 Door Table Saw & Shaper model 66, 72, 74

Our Powermatic 66 Door fits all Powermatic table saws and shapers.

Why a Bell Plastics’ Powermatic door?

  1.  Our door is better than the original covers. You can throw ours off the roof. You may scratch it, but it won’t break.
  2.  Our motor covers have extra depth that allows for larger motors and better cooling.
  3.  Black will go with every think.
  4.  Easy to paint. You can match your saw or shop color.
  5.  Lighter weight means lower shipping costs.
  6.  It keeps the saw chips in the saw cabinet. Saves clean up time so you don’t waste time sweeping instead of cutting.
  7.  Made in the USA by Bell Plastics

FAQ

All Powermatic doors are the same size. Including their shapers.

Door corresponds to Powermatic part # 2136002.

Door is crafted from 3/16 black ABS

For sizes see attached drawing.

Link to powermatic table saw & door combo

 

5 Inch dust collection port – Saw to hose adapter

Our 5 inch dust collection port will save you hours of clean up.

These adapter allow you to connect your dust collection hose to a table saw, band saw or sander. It also will work on any machine that makes chips.

The backing plate is bolted to the insides of the saw with the round hose connect passes through the saw’s wall.  A hose is slipped over the hose connector and held in place with a hose clamp. Because all saw are different our backing plate comes large flange and no holes so you can drill it to match your saw.

Made in the USA of thick ABS plastic.

This is for the adapter port only.

We also make port adapters for hoses 2 inch to 8 inches.

Have questions? Call us at 510-784-1111

 

Additional information

Weight 11 lbs
Dimensions 21 × 21 × 13 in

Reviews

There are no reviews yet.

Be the first to review “Powermatic Table saw 66-72, 74 1-3 HP Motor Cover, Door and Dust Port COMBO”

Your email address will not be published. Required fields are marked *