Dust Collector Adapter – Saw to Hose Adapter 3 inch
3 inch dust collection port, Saw to hose Adapter, SKU 1541
3 Inch dust collection port, Saw to hose Adapter
Our 3 inch dust collection port will save you hours of clear up.
These adapter allow you to connect your dust collection hose to a table saw, band saw or sander. It also will work on any machine that makes chips.
The backing plate is bolted to the insides of the saw with the round hose connect passes through the saw’s wall. A hose is slipped over the hose connector and held in place with a hose clamp. Because all saw are different our backing plate comes large flange and no holes so you can drill it to match your saw.
Made in the USA of thick ABS plastic.
This is for the adapter port only.
We also make port adapters for hoses 2 inch to 8 inches.
For table saws, place the adapter down on the cabinet as low as possible. Next close up all open area in the cabinet. If you have a older table saw with a open side Bell Plastics also makes motor covers and doors with closed vents.
More about Bell Plastics
|Dimensions||10 × 10 × 6 in|