Powermatic table saw 5 & 7.5 HP cover door port chute

$227.00 $204.00

Powermatic table saw 66-72, 74 5 – 7.5 HP motor cover, door, dust port and chute combo.

Description

Powermatic table saw combo for 5 & 7.5 HP motors includes;

Large flange motor cover

Front door

Vacuum port

Chip chute

Our Powermatic replacement motor cover fits tables saw with the small motors the 1-3 HP. It does not fit the the larger 5 and 7.5 HP motor.

Crafted of heavy-duty ABS black plastic, this motor covers fits model numbers 66 and 72.

Standard model is 20.25 high x 20.25 wide x 12″ deep total. The large is 22 X 22 X 12!

Measure the top of your opening to the bottom of your opening. Have questions? Call us at 510-784-1111!

Why choose a Bell Plastics motor covers?

* Our motor covers have extra depth that allows for larger motors. If you ever want to replace an older bullet shaped motor with a newer high efficiency motor, there’s plenty of room.
* Stronger! These thick plastic covers are sturdy and designed to take incredible impacts without breaking!
* Lighter weight means lower shipping costs and easier installing!
* It’s easy to paint to match your saw or shop colors, but you don’t have to! Classic black goes with everything!
* Keeps the saw chips in the saw cabinet. Saves clean up time so you don’t waste time sweeping instead of cutting.

Dust collection chute for Powermatic table saw

 

Rockwell table saw dust collection tray

Rockwell – Unisaw table saw dust collection Shoot

 

 

 

 

 

 

 

 

 

 

 

 

 

Powermatic dust collection shoot - table saw

Powermatic table saw dust collection Shoot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Our Powermatic dust collection shoots are designed to fit inside the lower cabinet of your Powermatic table saw.

It funnels chips and dust from the blade down to your vacuum hose.

You should never have to manually clean out your table saw cabinet again! Saving time and money.

This DOES NOT fix powermatic 72 or 72 A

4 Inch dust collection port – Saw to hose adapter

4 inch dust collection port

4 inch dust collection port

 

 

 

 

 

 

 

 

 

 

 

 

 

Our 4 inch dust collection port will save you hours of clean up.

These adapter allow you to connect your dust collection hose to a table saw, band saw or sander. It also will work on any machine that makes chips.

The backing plate is bolted to the insides of the saw with the round hose connect passes through the saw’s wall.  A hose is slipped over the hose connector and held in place with a hose clamp. Because all saw are different our backing plate comes large flange and no holes so you can drill it to match your saw.

Made in the USA of thick ABS plastic.

We also make port adapters for hoses 2 inch to 8 inches.

Door for Powermatic 66, 72, 74 table saw

Our Powermatic 66 Door fits all Powermatic table saws and shapers.

Why a Bell Plastics’ Powermatic door?

  1.  Our door is better than the original covers. You can throw ours off the roof. You may scratch it, but it won’t break.
  2.  Our motor covers have extra depth that allows for larger motors and better cooling.
  3.  Black will go with every think.
  4.  Easy to paint. You can match your saw or shop color.
  5.  Lighter weight means lower shipping costs.
  6.  It keeps the saw chips in the saw cabinet. Saves clean up time so you don’t waste time sweeping instead of cutting.
  7.  Made in the USA by Bell Plastics

 

Additional information

Weight 15 lbs
Dimensions 28 × 21 × 21 in

Reviews

There are no reviews yet.

Be the first to review “Powermatic table saw 5 & 7.5 HP cover door port chute”

Your email address will not be published. Required fields are marked *